HUBA CONTROL 402 SERIES - DIFFERENTIAL PRESSURE TRANSMITTER

Huba Control 402.9400021 Differential Pressure Transmitter

www.envirotechindustrialproducts.co.in

Huba Control 402.9400021 Differential Pressure Transmitter

  • Differential Pressure Transmitter
  • Type – 402
  • Manufacturer – HUBA CONTROL 
  • Model – 402.9400021
  • RANGE – 0-30 MBAR
  • OUT – 0.5….4.5 V
  • IN – 12 ( 10.2…. 33 ) V
  • Attractive Price-Performance Ratio
  • Excellent Synergy Of Membrane Technology And Ceramic Elements
  • Special Adapter For DIN Rail Mounting
  • Direct PCB Mounting With Simple Snap System
  • Pressure Measuring Range : 0…50 mbar Relative and Difference
  • Response Time : <10 ms
  • Load Change : <10 Hz
  • Sensor Weight : 28 g
  • Media : Air Neutral Gases
  • Medium Temperature : 0…70 °C Non-Freezing Media
  • Permissible Overload On One Side : 100 Mbar
  • Bursting Pressure At Room Temperature : 200 Mbar
  • Bursting pressure at 70°C : 150 Mbar
  • Ambient Temperature : 0… 70 °C
  • Storage Temperature : -30 …70 °C
  • Housing With Media Contact : Polycarbonate (PC); Polyamide (PA)
  • Membrane With Media Contact : Silicone
  • Measuring Element With Media Contact : Ceramic Al2O3 (96 %)
  • Output Pressure : 0,5 …4,5 V
  • Supply Voltage : 10,2 …33 VDC
  • Permissible Load : >15 kOhm Against GND
  • Current Consumption : <8 mA
  • Inverse-Polarity Protection : Mechanically Guaranteed
  • IP Protection Class : IP 00
  • Electrical Connection : Printed Circuit Board Assembly Solderable Pins On The Print Side Printed circuit board assembly Mounted And Soldered On Adapter RAST 2.5 Connector
  • EMC Compatibility :The Product Is Intended Exclusively For Installation In Appliances That Fulfil The Requirements Of The EC Directives CE Certification Is The Responsibility Of The Customer
  • Installation Orientation : Pressure Connections Downwards; Pressure Connection P1 Top
  • Assembly : Snap-On Mounting On Printed Circuit Board (Max. 1.6 MM Thickness); Adapter; Screw Mounting With Bracket.
  • VAB SYSTEMS
  • ERV
  • MOBILE HYDRAULIC
  • INDUSTRIAL AUTOMATION
  • RAST 2.5 Connector : With Cable; 110 CM; 3-Pole
  • Fastening Screw : For Wall Thickness 1 – 2 MM; Screw Length 6 MM (Min. 2 Screws Required)
  • Calibration Certificate
  • Mounting Bracket
  • Mounting Plate Complete For Mounting Rail TS 35
  • Fastening Screw : For Wall Thickness 4.1 – 6 MM; Screw Length 10 MM (Min. 2 Screws Required)


Additional Information:

  • Item Code: Huba Control 402.9400021 Differential Pressure Transmitter
  • WhatsApp No.9871034100,9868958924,9650264867,9716640145,8368866030,8368801023
  • www.envirotechindia.net
  • www.envirotechdelhi.info
  • www.envirotechindia.info

Leave a Reply

Your email address will not be published. Required fields are marked *